How to install Wincc?
To WinCC Installation, you will need to follow these steps:
- Download the installation file for WinCC from the Siemens website.
- Run the installation file and follow the prompts to complete the installation process.
- Once the installation is complete, you will need to activate the software using the activation key provided by Siemens.
- If you want to use the software for more than a trial period, you will need to purchase a license from Siemens.
- Once you have a valid license, you will be able to use WinCC and its full functionality.
It is important to note that this is a general process and specific details may vary depending on the version of WinCC you are using and your specific system configuration. It is recommended to refer to the documentation provided by Siemens for detailed instructions.
It’s also important to note that before installing WinCC, you should make sure that your computer meets the minimum system requirements, which can also be found on the Siemens website. This includes things like the operating system version, processor type and speed, and amount of RAM and hard drive space.
Additionally, it’s a good idea to back up any important data and files on your computer before installing WinCC, just in case something goes wrong during the installation process.
Once the installation is complete, you should also take the time to familiarize yourself with the software’s features and capabilities by going through the documentation and tutorials provided by Siemens. This will help you get the most out of WinCC and make the most efficient use of the software.
Also, it is always recommended to check for the latest updates and service packs available and install them to ensure that you are running the latest version of WinCC software.
WinCC Installation Requirements
You will need special hardware and software for the WinCC installation The requirements are described in the chapters “Hardware Requirements for Installation” and “Software Requirements for WinCC Installation”.
| Note Windows operating system: Avoid changes in system Windows settings deviating from default can have an effect on the operation of WinCC. Observe this note, particularly for the following changes: – Change of processes and services in the Control Panel. – Changes in Windows Task Manager. – Changes in Windows registry. – Changes in Windows security policies. |
- NB Designer OMRON HMI Youtube Tutorial Videos
- DOPSOFT DELTA HMI Youtube Tutorial Videos
- Wonderware Intouch Youtube Tutorial Videos
- GT Designer MITSUBISHI HMI Youtube Tutorial Videos
- WinCC Siemens HMI Youtube Tutorial Videos
- FACTORY TALK VIEW Youtube Tutorial Videos
The first check if certain conditions are met is already executed during the WinCC installation. The following conditions are checked:
- Operating system
- User Rights
- Graphic Resolution
- Internet Explorer
- MS Message Queuing
- Due Complete Restart (Cold Restart)
- Error Messages
If one these conditions is not met, the WinCC installation will be aborted and an error message will be displayed. For details about the error messages displayed see the table below.
| Error Message | Explanation |
|---|---|
| To execute installation properly, restart the computer | The software installed on your computer requires a restart. Before WinCC can be installed, the computer should be restarted once. |
| This application requires VGA or any higher resolution | Check the settings of the connected monitor and upgrade the graphic card, if necessary. |
| You do not have administrator rights. Log on as administrator. | Administrator rights are required for the installation. Please log in to Windows again as a user with administrator rights. |
| Setup has detected that unInstallShield is active. Please close unInstallShield and restart Setup. | Close unInstallShield. This message may also indicate that you are lacking administrator rights for this installation. In this case, log on to Windows again as user with administrator rights. |
| The Microsoft Message Queuing services are not installed. | Install the Microsoft Message Queuing services. To do this, you will need the Windows installation CD. You can find detailed information in the section “Installing Microsoft Message Queuing”. |
To install WinCC on your computer, your system must meet the minimum hardware and software requirements specified by Siemens. These requirements may vary depending on the version of WinCC you are installing, so it is important to check the documentation for your specific version. However, here are some general requirements that apply to most versions of WinCC:
Hardware Requirements for WinCC Installation:
- Processor: Intel Core i5 or higher (or equivalent AMD processor)
- RAM: 8 GB or more
- Hard Drive: At least 40 GB of free space
- Display: Monitor resolution of 1280×1024 or higher
- Network Card: 100 Mbit/s or higher
- Operating System: Windows 10 Pro/Enterprise 64-bit, Windows Server 2019 Standard/Datacenter 64-bit
Software Requirements for WinCC Installation:
- Microsoft .NET Framework 4.7.2 or higher
- Microsoft Visual C++ 2015 Redistributable Update 3
- Microsoft SQL Server 2017 Express LocalDB (for some versions of WinCC)
- Microsoft SQL Server 2016 Express LocalDB (for some versions of WinCC)
In addition to these requirements, you may also need to install additional software components, such as Microsoft Excel, if you plan to use certain features of WinCC.
It is important to note that these are only the minimum requirements for installing WinCC. For optimal performance and reliability, you may need to exceed these requirements depending on the size and complexity of your HMI project. Additionally, it is recommended to consult the WinCC documentation for any specific requirements related to your version or edition of WinCC.
Useful Links:-